Jasco 98756 User Manual

98067/98756/98046  
MiniCamPro  
User’s Manual  
For technical support contact Jasco Products at 1-800-654-8483  
System Requirements  
1. Operating System - Microsoft® Windows® 2000, XP and Vista  
2. CD drive  
3. USB port  
Maintenance Care and Storage  
1. Do not use or store the camera in high humidity and extreme  
high/low temperature.  
2. Do not touch the lens with your fingers.  
3. Do not drop the camera or get the camera wet.  
4. Do not try to repair the camera.  
5. To clean the camera, use a dry cloth. Do not use organic solvents,  
such as alcohol etc. to clean the camera.  
6. Store the camera in a dry and clean place  
Contents  
1. MiniCamPro with stand and clip  
2. CD with driver and software application  
3. Instruction manual  
3
Getting to Know Your MiniCamPro  
Snap Shot Button  
Microphone  
Note: You must install  
the camera driver  
BEFORE connecting  
the camera to your  
computer.  
Focus Ring  
Lens  
Camera Stand  
Installation  
Please note that you must install the camera drivers BEFORE you connect the  
camera to the USB port of your computer.  
1. You must install all relevant updates, service packs, and patches for  
your operating system. These are available on Microsoft’s® website under  
“Resources”. Use the “Windows Update” link. (www.microsoft.com).  
2. Insert the included MiniCamPro CD into the CD Rom Drive.  
(The CD should auto load).  
3. If CD does not auto load, follow these steps:  
a. Double click on My Computer  
b. Double click on the CD icon on the CD drive  
c. Double click on setup.exe  
4
4. The installation menu will come up. Select MiniCamPro Driver.  
5. Select Next on the Welcome screen.  
6. Under Setup Type select Complete, and then Next to continue.  
7. Select Install to begin copying the driver files to your computer.  
8. On the final screen, select Finish.  
9. It may be necessary to have your Windows installation disk available to  
install any additional windows drivers onto your computer. You will  
receive a prompt if this is necessary.  
10. (Optional) On the installation menu, select ArcSoft Software Suite.  
Follow the on screen instructions to install ArcSoft VideoImpression™  
and/or ArcSoft PhotoImpression. DirectX® may install as well. Please  
follow the instructions to complete the installation. You may need to  
reboot your computer.  
11. (Optional) Select User’s Manauls to open a PDF version of the  
Instruction Manual in both English and Spanish. You will need Adobe  
Reader to open the user’s manuals.  
12. (Optional) To download Adobe® Reader® select Adobe Reader 7.0  
and follow the instruction instructions. You may need to reboot your  
computer.  
13. When you have installed the driver, and all of the optional software  
you want to install, select Exit.  
14. Remove the warning label from the USB plug of your MiniCamPro.  
15. After your computer reboots, plug your MiniCamPro’s USB plug into  
the USB plug of your computer.  
16. Open ArcSoft VideoImpressionor ArcSoft PhotoImpresssionand  
follow the instructions to begin using your MiniCamPro camera. Enjoy!  
5
PhotoImpression- Welcome to PhotoImpression  
ArcSoft PhotoImpression™  
is an easy-to-use image-  
editing program specifically  
designed for general  
consumers. The program  
enables you to edit, retouch,  
enhance or add special effects  
to digital images with point-  
and-click simplicity. It also  
offers a great variety of project  
templates for creating greeting  
cards and calendars, plus the  
functionalities of the popular Arcsoft PhotoPrinter® and  
Funhouseprograms.  
ArcSoft PhotoImpressionis an all-inclusive application designed specifically  
for novice users. It combines photo editing with additional creative and  
printing tools that maximize your digital imaging experience.  
Features include:  
Create dynamic images  
Editable text  
Instantly remove red-eye  
Special effects and enhancements/Intuitive resize options  
Photo fun  
Choose from a wide variety of frames, brush stroke edges and shapes  
Multiple, advanced printing options--now with PIM!  
Desktop interaction  
Works great with digital cameras and scanners  
6
To Open ArcSoft PhotoImpression™  
1. Double click on the ArcSoft PhotoImpressionicon on the desktop.  
2. You may also go to ArcSoft under Programs in the Start Menu, and  
click on Photo Impression.  
Using Photo Impression  
1. Click on “Camera/Scanner”.  
See picture below.  
2. Select “GE MiniCamPro”.  
3. The new window will allow  
you to capture your pictures.  
Edit Captured Pictures  
1. After you have captured  
pictures, you’re ready to edit  
them. To get started select  
a picture from the ones you  
captured.  
2. Your picture will open in the  
main window. See Diagram.  
3. Click on the Enhance,  
Create, Project, Save or  
Print button on the left.  
See Diagram.  
7
4. The associated menus are located on the bottom of the screen.  
Scroll through those to find what you need. See Diagram. Have fun!  
If you need more help, click on “Help” in the upper left-hand corner of the  
tance, patches, free card and calendar templates and other fun stuff.  
Video Impression™  
ArcSoft Video Impressionis a powerful, easy-to-use video editing and  
presentation program designed for consumers. ArcSoft Video Impression™  
enables you to edit video clips and still images, and to combine them to  
create multimedia desktop video presentations for home, business,  
and the Internet.  
ArcSoft Video Impressionis your ticket to cool home movies and slide  
shows. If you know how to drag-and-drop with your mouse, you’re all set!  
In no time you can combine still images, video clips, audio tracks, text, and  
special effects into your very own movie. Make a VCD and play your movie  
on your DVD player!  
8
Working with Video Impression™  
Getting Started  
Working with Albums  
Working with the Storyboard  
Editing Images  
Editing Video  
Editing Audio  
Printing a Still Image from a Video  
Saving a Movie  
ArcSoft Video Impression- Getting Started  
1. Open ArcSoft Video Impression™  
A) Double click on the Video Impression icon on your desktop.  
B) You may also go to ArcSoft under Programs in the Start Menu, and  
click on Video Impression  
2. Click on “Create a New Video.”  
3. Click on the icon: “Capture From Device.”  
4. You should be viewing live video now. If not click on the eye icon to  
start viewing live video.  
5. When you’re ready to record, click the record button ( ).  
6. Use the pause button ( ) to stop recording.  
7. The play button ( ) will play back your video.  
8. If you want to save what you have recorded, click the album icon to  
the right of “Album”.  
9
If you need more help, click on “Help” in the upper left-hand corner of the  
screen.  
Note: If you are trying to send a video clip by email, your email provider may  
have a size limitation.  
patches, templates and other fun stuff.  
MSN® Messenger  
Installing/Opening MSN® Messenger  
A. Windows® 98/ME/2000  
• After it has downloaded, you can open MSN® Messenger by going to  
Start  
Programs  
Windows Messenger.  
B. Windows® XP/Vista  
• MSN® Messenger is already installed  
• Open MSN® Messenger by going to Start  
Messenger.  
Programs  
Windows  
10  
Using MSN® Messenger with your camera  
1. Make sure the MiniCamPro driver has been installed.  
2. Plug the camera into any USB port on your computer.  
3. Open MSN® Messenger using the instructions above.  
4. To start a video conference  
a. In Windows® 98/ME/2000 click on NetMeeting.  
b. In Windows® XP/Vista click on Actions  
Start a Video Conversation.  
Note 1: In order to chat and share video with a friend, you will need to add  
your friend to your contact list. Your friend will also need to use MSN®  
Note 2: Windows® XP & Vista users may be asked to add a .NET Passport to  
your user account. Follow the instructions.  
If you need more help, click on ”Help” in the upper right-hand corner of  
technical assistance  
Troubleshooting  
1. Camera will not turn on  
• Make sure the camera is plugged into the USB port correctly  
• Make sure your USB port is functioning properly. You may need to  
install updates, service packs, or patches for your operating system  
from Microsoft’s® website, www.microsoft.com. Go to “Windows  
Update” under Resources.  
2. Uninstall the MiniCamPro driver  
• Close all open applications.  
11  
• Go to the Start Menu  
(Settings in some operating systems)  
Control Panel  
Add/Remove Programs  
• Select “MiniCamPro”  
• Select “Remove”, then “OK” to uninstall the driver.  
• Select “Yes, I want to restart my computer”, then “Finish”.  
• Your computer will now reboot.  
3. “Can’t detect camera”, “Can’t find VFW driver”, or “Can’t find camera  
driver” errors  
• Close all open applications.  
• Unplug the MiniCamPro from your computer.  
• Uninstall the MiniCamPro software according to the directions above,  
then reboot your computer.  
• Re-install the MiniCamPro driver according to the installation  
directions, then reboot your computer.  
• Plug in your MiniCamPro.  
4. Problems with Photo Impressionor Video Impression™  
5. Problems with MSN™ Messenger  
**Microsoft and Arcsoft may update their software at any time.  
1ꢀ  
TWO YEAR LIMITED WARRANTY  
Jasco Products Company warrants this product to be free from manufac-  
turing defects for a period of two years from the original date of consumer  
purchase. This warranty is limited to the repair or replacement of this  
product only and does not extend to consequential or incidental damage to  
other products that may be used with this unit. This warranty is in lieu of all  
other warranties express or implied. Some states do not allow limitations  
on how long an implied warranty lasts or permit the exclusion or limitation  
of incidental or consequential damages, so the above limitations may not  
apply to you. This warranty gives you specific rights, and you may also have  
other rights which vary from state to state. If unit should prove defective  
within the warranty period, return prepaid with dated proof of purchase to:  
Jasco Products Company  
10 E. Memorial  
Oklahoma City, OK 73114  
FCC Statement  
Notice: Federal Communications Commission (FCC) requirements, Part 15  
This equipment has been tested and found to comply with the limits for a  
class B digital device, pursuant to part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in  
a residential installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in accordance with  
the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to  
radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the interfer-  
ence by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
13  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
CAUTION: Any changes of modifications not expressly approved by the  
grantee of this device could void the user’s authority to operate the  
equipment.  
This device complies with Part 15 of the FCC Rules. Operation is subject to  
the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
Distributed for GE  
by Jasco Products Company  
10 E. Memorial, Oklahoma City, OK 73114  

A O Smith VF Series User Manual
Atlantis Land I See S170 17" LCD Monitor A05 17AM C02 User Manual
Black Decker CRUSH MASTER BL2351P User Manual
Bradford White Corp BRUTE DELUXE BMT2V User Manual
Canon DC301 User Manual
Citizen Calculator SR 281N User Manual
Clarion DB348RMP User Manual
JBL POWER SERIES Px300 4 User Manual
JVC CS ARS680 User Manual
JVC GR FX15 User Manual