Jasco Universal Remote RM24977 User Manual

RM24977  
Universal Remote  
Instruction Manual  
 
Button Functions  
Button Functions, cont.  
Some buttons on the remote might have functions that  
are referred to by different names on the device you are  
controlling. E.G. PREV.CH may be called RECALL, or  
ENTER may be called DISPLAY. These differences  
depend on the brand and model of your product. Also,  
this remote can only operate features that exist on your  
product. E.G., your product must have PREV.CH ability  
for the PREV.CH button to operate this feature.  
CHANNEL Up/Down  
Changes the channels.  
SKIP +/- controls DVD/CD  
track selection i.e. DVD/CD  
Track Skip Up/Down (in  
DVD and CD modes).  
Shift Press and  
release to access  
buttons labeled in red  
(red indicator stays on).  
Press again to exit  
Shift mode.  
VOLUME UP/DOWN  
Changes the volume  
level of the product,  
normally the TV.  
TV, VCR, etc.  
ON-OFF Turns  
Red Indicator  
Selects product product On or Off. Lights when any  
to be operated.  
button is pressed.  
OK Selects menu  
items for the device  
you are controlling.  
CODESEARCH  
For setup.  
MUTE Turns off the  
TV sound while the  
picture remains.  
INFO button brings up DVD  
Display or Control Menu for  
Chapter/Track/Title number,  
Time remaining/elapsed,  
system information, etc.  
PREV.CH Returns to  
the previously selected  
channel, or DVD repeat  
toggle. REPEAT performs  
DVD players “A-B Repeat”  
(or RPT A.B) function for  
repeat play of current  
Chapter or Track.  
Menu Press and release Shift  
then Menu to display the menu  
on the TV. The red LED is on  
continuously to indicate the  
remote is in Menu mode, VOL  
UP/DOWN keys operate as  
cursor right/left, CH+/- keys  
operate as cursor up/down,  
and Mute operates as OK.  
Press Sleep/Exit key to exit  
Menu.  
CC (SUBTITLE)  
TV Closed  
Caption (if your  
TV has this  
feature) or DVD  
Subtitle toggle.  
TITLE Brings up the DVD  
Title Menu screen.  
GUIDE displays satellite  
or cable on-screen  
program guide.  
NUMBERS  
Enter numbers for direct  
channel selection. Some  
products require ENTER to be  
pressed after channel selection.  
ENTER  
For some TV models,  
used after direct channel  
number entry to immedi-  
ately change to the  
selected channel.  
INPUT  
For some TVs, press repeatedly to  
select from available viewing sources  
(antenna, cable box, VCR, etc.).  
RECORD, PLAY, STOP, REW, FF, PAUSE VCR  
control buttons operate your VCR even when the  
remote is set to operate the TV. Also operates  
DVD Scan -/+. Note the VCR keys also control  
Note: The REC button must be pressed TWICE to  
record from your VCR. For some brands of VCRs, you  
might need to press the REC button once, then press it  
again for three seconds.  
DVD when in DVD Mode.  
4
5
 
SAT Functions  
DVD Functions  
This remote has several dedicated buttons used for  
DVD functions. The descriptions may vary from your  
original remote descriptions.  
GUIDE button displays on-screen Satellite Channel  
Guide.  
CHANNEL+ and CHANNEL- buttons perform the  
Page+” and “Page-” function for on-screen Guide  
Menus used by some Satellite systems.  
INFO button brings up Satellite Display screen for  
current Channel and system information.  
MENU brings up the Satellite Menu screen - use  
with the UP, DOWN, LEFT & RIGHT navigation  
buttons.  
SCAN+ and SCAN- buttons control the speed of  
Fast Forward and Reverse Playback respectively.  
SKIP (Channel Up & Down) buttons respectively  
locate the succeeding or preceding Chapters or  
Tracks on a disc.  
SUBTITLE (CC) Turns the subtitles on or off.  
TITLE Brings up the DVD Title Menu screen.  
REPEAT A-B button performs DVD players “A-B  
Repeat” (or RPT A.B) function for repeat play of  
current Chapter or Track.  
OK button is used for on-screen Menu selection.  
EXIT button is used to Exit or Clear on-screen  
Menu displays.  
INPUT/SETUP performs the TV/SAT function.  
INFO button brings up DVD Display or Control  
Menu for Chapter/Track/Title number, Time remain-  
ing/elapsed indication, system information, etc.  
PLAY button is used to start Disc playback and for  
Menu selection on some DVD players.  
STOP button stops Disc playback.  
PAUSE button pauses Disc playback - press PLAY  
to resume.  
SETUP (INPUT) brings up the DVD Players Setup  
Menu.  
SLEEP Function  
The Sleep button enables the remote to turn off  
your TV after a period of 1 to 99 minutes as shown  
below. The remote must be in TV mode to set a  
Sleep Timer. This feature works even if your TV  
does not have a sleep feature.  
1. Press and release the TV mode button.  
SHIFT Press and release to access buttons  
labeled in red (red indicator stays on).  
Press again to exit Shift mode. In Shifted mode the  
red arrows on the Ch and Vol buttons work as  
up/down and left/right navigation buttons.  
MENU Press and release SHIFT then MENU  
to display the DVD disc menu on the TV.  
The red LED is on continuously to indicate the  
remote is in Menu mode.  
2. Press and hold the Sleep button until the  
LED remains lit (about 2-3 seconds).  
3. Release the Sleep button.  
4. Press and release the  
numeric keys (01-99)  
for the time required.  
The LED will blink off  
to indicate button  
VOL UP/DOWN operate as cursor right/left.  
CH +/- operate as cursor up/down.  
MUTE/OK button is used to select the on-screen  
item. Note some DVD players require the Play  
button to be used.  
press acceptance.  
5. TV Sleep Timer is set.  
EXIT Exit On-Screen Menus and/or Return to  
previous On-Screen selection.  
6. Leave the Remote pointing towards the TV  
with an unobstructed path.  
To cancel the Sleep Timer, press and hold the  
Sleep button until the LED blinks, or press and  
release the Power key in TV mode.  
Note, not all DVD Players support all the functions  
described above.  
6
7
 
Direct Code Entry  
Code Search  
1. Press and hold the CODE SEARCH button  
until the red indicator stays on, then  
release the CODE SEARCH button.  
If your device does not respond after you have tried  
all the codes for your brand, or if your brand is not  
listed, try searching for your code by following these  
steps.  
2. Press and release the desired mode  
button (TV, VCR, etc.). The red indicator  
blinks, then stays lit.  
1. Manually turn on the device (TV, VCR, etc.) to be  
controlled.  
3. Enter the 4 digit code  
from the code tables  
(on separate sheet).  
Note: after a valid code  
entry, the red indicator  
turns off. For an invalid  
code, the red indicator  
flashes.  
2. Press and hold the CODE SEARCH  
button until the red indicator stays on,  
then release the CODE SEARCH button.  
3. Press and quickly release the  
desired mode button (TV, VCR, etc.).  
The red indicator blinks off once.  
4. Press the CHANNEL UP button  
repeatedly (up to 300 times) until  
the device to be controlled  
changes channel. The red  
4. With your device on, press ON/OFF.  
If the device turns off, no further  
programming is required. Note: If  
some buttons do not operate your  
equipment, try one of the other  
codes for your brand.  
indicator blinks off with each  
button press. If you accidentally overshoot the  
code required, press the CHANNEL DOWN button  
to backtrack through the library until the device  
changes channel. Pressing CHANNEL UP  
changes direction to forward again.  
Write your codes down here for easy reference  
later.  
5. Press and release ENTER to install the  
Device  
Device stored Code  
TV  
code.  
Most users will store VCR codes under the VCR button,  
Cable codes under CABLE, etc. If (for example) you  
want to store a VCR code under CABLE, first follow the  
procedure for Direct Code Entry (page 8) and press  
CABLE in step 2 of Direct Code Entry, then enter ANY  
VCR code in step 3 of Direct Code Entry. Then follow  
the steps above for Code Search.  
TV  
VCR/AUX  
DVD  
CBL/SAT  
Note: If the device does not have a CHANNEL UP  
button, use PLAY (VCR only) or POWER instead. Code  
Search starts from the currently stored four digit  
number under that mode. Sometimes the first code  
that “works” with your device may only allow limited  
functionality (e.g. the MENU button might not work).  
There may be a code that performs more functions.  
Continue the code search process until the best code  
is found.  
8
9
 
UsingYour Remote, cont.  
UsingYour Remote  
Code Identification  
Controlling Devices with Separate  
Power On and Off Buttons  
The Code Identification Feature allows you to  
identify the four digit library code stored under your  
device key. For example, if you want to find out what  
four digit code is stored under your TV device key,  
follow the six steps below:  
Some GE, RCA and ProScan models require you to  
press the device button for more than one second  
to turn the device on and the POWER button to turn  
the device off.  
1. Press and hold the CODE SEARCH button  
until the red indicator stays on.  
Controlling Combo Devices  
Release the CODE SEARCH button.  
Some Combo devices (e.g. TV/VCR, TV/DVD,  
DVD/VCR, etc.) will require you to set up two  
different Mode buttons to control both parts of the  
Combo device. For example, if you have a TV/DVD  
Combo, you might need to set up one code under  
the TV button to control the TV part AND a  
separate code (under any other Mode button) to  
control the DVD part.  
2. Press and release the desired mode  
button (TV, VCR, etc.). The red  
indicator blinks, then stays lit.  
3. Press and release the CODE SEARCH  
button. The red indicator blinks once  
and remains lit.  
4. To find the first digit for  
the code stored under  
the mode key pressed  
in step 2, press each  
numeric key from 0-9  
in turn. The number  
that causes the  
VCR/DVD Punch-Through  
This remote allows the 6 VCR transport buttons  
(i.e. PLAY, PAUSE, STOP, FF, REWIND, and REC)  
to Punch-Through control from any Mode  
programmed with TV, SAT or Cable codes to the  
last VCR, or DVD programmed Mode you used.  
This feature will not operate if the programmed TV,  
SAT or Cable code has its own VCR transport  
button control e.g. a TV Combo, SAT/PVR, etc.  
indicator light to blink  
is the first digit in your  
code.  
5. To find the second digit, repeat step 4.  
6. Repeat step 4 to find the third and fourth digit.  
This time the red indicator turns off and stays off.  
10  
11  
 
UsingYour Remote, cont.  
UsingYour Remote, cont.  
Volume/Mute Control and Punch-  
Through  
Setting any Mode to use its own  
Volume/Mute Control  
This remote lets you select which device Mode  
controls your Volume/Mute buttons. The remote is  
initially set for all device Modes to use their own  
Volume/Mute control if present. If the programmed  
code has no Volume/Mute operation of its own then  
those buttons will punch-through control to the TV  
Mode device without needing to change to TV  
Mode.  
This routine can set any Mode to use only its own  
Volume/Mute control. Note - If your chosen Mode  
has no Volume/Mute functions of its own then the  
Volume/Mute buttons will do nothing.  
1. Press and hold the CODE SEARCH button  
until the red indicator turns on, then  
release the button.  
Any Mode chosen for Volume/Mute control  
MUST have its own Volume/Mute function or  
the Volume/Mute buttons will do nothing.  
2. Press and hold the MUTE button until  
the red indicator blinks off, then release  
the button.  
3. Press and release the desired Mode  
button (TV, VCR, etc.), the red indicator  
blinks then stays on.  
Setting ALL Volume/Mute Control to  
any one Mode  
This routine can set all Modes to “punch-through” to  
any one chosen Mode for Volume/Mute button  
control without the needing to change to that Mode.  
4. Press and release the VOLUME-  
(Down) button, the red indicator blinks  
then stays on.  
1. Press and hold the CODE SEARCH button  
until the red indicator turns on, then  
release the button.  
5. Press and release the MUTE button and  
the red indicator turns off.  
2. Press and hold the MUTE button until the  
red indicator blinks off, then release the  
button.  
Your chosen Mode will now use its own Volume/  
Mute control.  
3. Press and release the desired Mode button  
(TV, VCR, etc.) for Volume/Mute control,  
the red indicator blinks then stays on.  
4. Press and release the MUTE button and  
the red indicator turns off. The red indicator  
will blink rapidly for three seconds if the  
Mode you have selected has no Volume/  
Mute control.  
All other Modes will now punch-through to your  
chosen Mode for Volume/Mute control.  
12  
13  
 
Troubleshooting  
90 Day Limited Warranty  
Remote does not operate your product.  
Jasco Products Company warrants this product to  
be free from manufacturing defects for a period of  
ninety days from the original date of consumer  
purchase. This warranty is limited to the repair or  
replacement of this product only and does not  
extend to consequential or incidental damage to  
other products that may be used with this unit. This  
warranty is in lieu of all other warranties express or  
implied. Some states do not allow limitations on  
how long an implied warranty lasts or permit the  
exclusion or limitation of incidental or consequential  
damages, so the above limitations may not apply to  
you. This warranty gives you specific rights, and  
you may also have other rights which vary from  
state to state. If unit should prove defective within  
the warranty period, return prepaid with dated proof  
of purchase to:  
Press the mode button of the product you want  
to control.  
Program the remote with a new code.  
Install new batteries. (You might have to  
reprogram your remote after installing new  
batteries.)  
Remote may not be compatible with your  
product.  
Remote does not operate some features of  
your product.  
Sometimes a particular code might operate  
some features but not all. Try programing  
remote with a new code.  
Remote may not be able to operate all features  
of your product or button names might be  
different than your product.  
Jasco Products Company  
311 N.W. 122nd  
Oklahoma City, OK 73114  
Red Indicator blinks after you program a  
product code.  
Remote did not accept the code.  
Try to program the code again or try a different  
code.  
Lost Your Codes?  
Enclosed with this remote is a sticker on which you  
should write the codes for each device you  
programmed. Apply the sticker to the back of the  
remote or somewhere convenient for future  
reference.  
Also on the sticker is our website address which,  
should you lose your codes or programming  
instructions, you can find available on our website:  
14  
15  
 
RM24977  
Universal Remote  
Instruction Manual  
Jasco Products Company  
311 N.W. 122nd  
Oklahoma City, OK 73114  
Made in China  
RM24977-03/05  
 

Indesit Cooktop KP9F11S G User Manual
Insignia DVD VCR Combo NS F20TR User Manual
IRiver MP3 Player IHP 140 User Manual
JVC CD Player XM EX90 User Manual
JVC Home Theater Screen TM A140E User Manual
Kathrein Satellite TV System MSK 200 S2 User Manual
Kenwood Stereo Amplifier KAC 6104D User Manual
Kenwood Stereo System MD 2070 User Manual
Kettler Backyard Playset 8411 182 User Manual
Klipsch Speaker RC 62 User Manual