Jasco Universal Remote RM24930 User Manual

RM24930  
Universal Remote  
Instruction Manual  
 
Button Functions  
Button Functions, cont.  
SETUP Used to setup  
the remote, and for  
code search function.  
ON-OFF Turns  
product On or Off.  
Some buttons on the remote might have functions that  
are referred to by different names on the device you are  
controlling. E.G. PREV.CH may be called RECALL, or  
ENTER may be called DISPLAY. These differences  
depend on the brand and model of your product. Also,  
this remote can only operate features that exist on your  
product. E.G., your product must have PREV.CH ability  
for the PREV.CH button to operate this feature.  
SLEEP enables the remote  
to turn off your TV after a  
period of 1 to 99 minutes.  
MUTE Turns off the  
TV sound while the  
picture remains.  
TV, CBL/SAT, VCR, DVD/  
AUX Selects product to  
be operated.  
Red Indicator  
Lights when any  
button is pressed.  
PREV.CH Returns to  
the previously selected  
channel.  
VOLUME UP/DOWN  
Changes the volume  
level of the product,  
normally the TV.  
CHANNEL Up/Down  
Changes the channels.  
The Channel buttons  
also control DVD SKIP  
functions.  
INFO Shows the date  
and time if your TV or  
VCR has that feature.  
Works the same way as  
a Display button.  
INPUT Selects the  
video inputs of your  
TV if equipped with  
that feature.  
MENU Brings up device  
Main Menu. Use Chan  
and Vol buttons as cursor  
buttons and Mute as Okay.  
Press TV to Exit.  
0-9  
Enter numbers for direct  
channel selection. Some  
products require ENTER  
to be pressed after  
ENTER  
Used to complete  
channels selection for  
some brands of TV. Also  
used to complete the  
code entry process.  
channel selection.  
TV/VCR Operates the TV/  
VCR function of your VCR.  
RECORD, PLAY, STOP,  
REW, FF, PAUSE VCR  
control buttons operate  
your VCR even when the  
remote is set to operate  
the TV. Also operates DVD  
Scan -/+. Note the VCR  
buttons also control DVD  
when in DVD Mode.  
Note: The REC button must be pressed TWICE to  
record from your VCR. For some brands of VCRs, you  
might need to press the REC button once, then press it  
again for three seconds.  
4
5
 
Menu Operation  
Direct Code Entry  
The Menu button puts the remote in and out of  
Menu Mode. Pressing Menu brings up your  
device Menu. While in Menu mode the remote’s red  
indicator light blinks continuously. The remote will  
exit Menu Mode after 20 seconds if no keys are  
pressed.  
1. Press and hold the SETUP button until  
the red indicator stays on, then release  
the SETUP button.  
2. Press and release the desired device  
button (TV, VCR, etc.). The red indicator  
blinks, then stays lit.  
When in Menu Mode, the Menu, Channel, Volume,  
Mute and Device keys operate as follows:  
3. Enter the 4 digit code  
from the code tables  
(on separate sheet).  
Note: after a valid code  
entry, the red indicator  
turns off. For an invalid  
code, the red indicator  
flashes.  
MENU Enters Menu mode.  
CHANNEL UP/DOWN Cursor Up/Down for Menu  
navigation.  
VOLUME UP/DOWN Cursor Right/Left for Menu  
navigation.  
4. With your device on, press ON/OFF.  
If the device turns off, no further  
programming is required. Note: If  
some buttons do not operate your  
equipment, try one of the other  
codes for your brand.  
MUTE (OK) command for Menu selections.  
Press TV or any other Device key to Exit, Clear, or  
Quit the Device Menu and return the remote to  
normal operation (red indicator will turn off).  
Write your codes down here for easy reference  
later.  
For certain RCA, GE, and ProScan devices,  
pushing the MENU button selects the highlighted  
item. The numeric buttons may also be used to  
select the MENU choice.  
Note: Some functions in some brands might not be  
fully supported.  
Device  
Device stored Code  
TV  
TV  
CBL/SAT  
VCR  
DVD/AUX  
6
7
 
Code Search  
UsingYour Remote  
If your device does not respond after you have tried  
all the codes for your brand, or if your brand is not  
listed, try searching for your code by following these  
steps.  
Code Identification  
The Code Identification Feature allows you to  
identify the four digit library code stored under your  
device button. For example, if you want to find out  
what four digit code is stored under your TV device  
button, follow the six steps below:  
1. Manually turn on the device (TV, VCR, etc.) to be  
controlled.  
2. Press and hold the SETUP button until  
the red indicator stays on, then  
release the SETUP button.  
1. Press and hold the SETUP button until  
the red indicator stays on. Release the  
SETUP button.  
3. Press and quickly release the desired  
device button (TV, VCR, etc.). The red  
indicator blinks off once.  
2. Press and release the desired device  
button (TV, VCR, etc.). The red  
indicator blinks, then stays lit.  
4. Press the ON-OFF button repeatedly  
(up to 300 times) until the device to  
be controlled turns off. The red  
indicator blinks off with each button  
press.  
3. Press and release the SETUP button.  
The red indicator blinks once and  
remains lit.  
4. To find the first digit for  
the code stored under  
the device button  
5. Press and release ENTER to install the  
code.  
pressed in step 2,  
press each numeric  
button from 0-9 in  
turn. The number that  
causes the indicator  
light to blink is the  
Most users will store VCR codes under the VCR button,  
Cable codes under CABLE, etc. If (for example) you  
want to store a VCR code under DVD/AUX, first follow  
the procedure for Direct Code Entry (previous page)  
and press DVD/AUX in step 2 of Direct Code Entry, then  
enter ANY VCR code in step 3 of Direct Code Entry.  
Then follow the steps above for Code Search.  
first digit in your code.  
5. To find the second digit, repeat step 4.  
Note: Code Search starts from the currently stored  
four digit number under that mode. Sometimes the  
first code that “works” with your device may only allow  
limited functionality (e.g. the MENU button might not  
work). There may be a code that performs more  
functions. Continue the code search process until the  
best code is found.  
6. Repeat step 4 to find the third and fourth digit.  
This time the red indicator turns off and stays off.  
8
9
 
UsingYour Remote, cont.  
UsingYour Remote, cont.  
Sleep Function  
Controlling Devices with Separate  
Power On and Off Buttons  
The Sleep button enables the remote to turn off  
your TV after a period of 1 to 99 minutes as shown  
below. The remote must be in TV mode to set a  
Sleep Timer. This feature works even if your TV  
does not have a sleep feature.  
Some GE, RCA and ProScan models require you to  
press the device button for more than one second  
to turn the device on and the ON•OFF button to turn  
the device off.  
1. Press and release the TV device button.  
Controlling Combo Devices  
Some Combo devices (e.g. TV/VCR, TV/DVD,  
DVD/VCR, etc.) will require you to set up two  
different Mode buttons to control both parts of the  
Combo device. For example, if you have a TV/DVD  
Combo, you might need to set up one code under  
the TV button to control the TV part AND a  
separate code (under any other Mode button) to  
control the DVD part.  
2. Press and hold the Sleep button until the  
LED remains lit (about 2-3 seconds).  
3. Release the Sleep button.  
4. Press and release the  
numeric buttons (01-  
99) for the time  
required. The LED will  
blink off to indicate  
button press accep-  
tance.  
VCR/DVD Punch-Through  
This remote allows the 6 VCR transport buttons  
(i.e. PLAY, PAUSE, STOP, FF, REWIND, and REC)  
to Punch-Through control from any Mode  
programmed with TV, SAT or Cable codes to the  
last VCR, or DVD programmed Mode you used.  
This feature will not operate if the programmed TV,  
SAT or Cable code has its own VCR transport  
button control e.g. a TV Combo, SAT/PVR, etc.  
5. TV Sleep Timer is set.  
6. Leave the Remote pointing towards the TV  
with an unobstructed path.  
To cancel the Sleep Timer, press and hold the  
Sleep button until the LED blinks, or press and  
release the Power button in TV mode.  
10  
11  
 
UsingYour Remote, cont.  
UsingYour Remote, cont.  
Volume/Mute Control and Punch-  
Through  
Setting any Mode to use its own  
Volume/Mute Control  
This remote lets you select which device Mode  
controls your Volume/Mute buttons. The remote is  
initially set for all device Modes to use their own  
Volume/Mute control if present. If the programmed  
code has no Volume/Mute operation of its own then  
those buttons will punch-through control to the TV  
Mode device without needing to change to TV  
Mode.  
This routine can set any Mode to use only its own  
Volume/Mute control. Note - If your chosen Mode  
has no Volume/Mute functions of its own then the  
Volume/Mute buttons will do nothing.  
1. Press and hold the SETUP button until  
the red indicator turns on, then release  
the button.  
2. Press and hold the MUTE button until  
the red indicator blinks off, then release  
the button.  
Any Mode chosen for Volume/Mute control  
MUST have its own Volume/Mute function or  
the Volume/Mute buttons will do nothing.  
3. Press and release the desired Mode  
button (TV, VCR, etc.), the red indicator  
blinks then stays on.  
Setting ALL Volume/Mute Control to  
any one Mode  
This routine can set all Modes to “punch-through” to  
any one chosen Mode for Volume/Mute button  
control without the needing to change to that Mode.  
4. Press and release the VOLUME-  
(Down) button, the red indicator blinks  
then stays on.  
1. Press and hold the SETUP button until  
the red indicator turns on, then release  
the button.  
5. Press and release the MUTE button and  
the red indicator turns off.  
2. Press and hold the MUTE button until the  
red indicator blinks off, then release the  
button.  
Your chosen Mode will now use its own Volume/  
Mute control.  
3. Press and release the desired Mode button  
(TV, VCR, etc.) for Volume/Mute control,  
the red indicator blinks then stays on.  
4. Press and release the MUTE button and  
the red indicator turns off. The red indicator  
will blink rapidly for three seconds if the  
Mode you have selected has no Volume/  
Mute control.  
All other Modes will now punch-through to your  
chosen Mode for Volume/Mute control.  
12  
13  
 
Troubleshooting  
90 Day Limited Warranty  
Remote does not operate your product.  
Jasco Products Company warrants this product to  
be free from manufacturing defects for a period of  
ninety days from the original date of consumer  
purchase. This warranty is limited to the repair or  
replacement of this product only and does not  
extend to consequential or incidental damage to  
other products that may be used with this unit. This  
warranty is in lieu of all other warranties express or  
implied. Some states do not allow limitations on  
how long an implied warranty lasts or permit the  
exclusion or limitation of incidental or consequential  
damages, so the above limitations may not apply to  
you. This warranty gives you specific rights, and  
you may also have other rights which vary from  
state to state. If unit should prove defective within  
the warranty period, return prepaid with dated proof  
of purchase to:  
Press the device button of the product you want  
to control.  
Program the remote with a new code.  
Install new batteries. (You might have to  
reprogram your remote after installing new  
batteries.)  
Remote may not be compatible with your  
product.  
Remote does not operate some features of  
your product.  
Sometimes a particular code might operate  
some features but not all. Try programing  
remote with a new code.  
Remote may not be able to operate all features  
of your product or button names might be  
different than your product.  
Jasco Products Company  
311 N.W. 122nd  
Oklahoma City, OK 73114  
Red Indicator blinks after you program a  
product code.  
Remote did not accept the code.  
Try to program the code again or try a different  
code.  
Lost Your Codes?  
Enclosed with this remote is a sticker on which you  
should write the codes for each device you  
programmed. Apply the sticker to the back of the  
remote or somewhere convenient for future  
reference.  
Also on the sticker is our website address which,  
should you lose your codes or programming  
instructions, you can find available on our website:  
14  
15  
 
RM24930  
Universal Remote  
Instruction Manual  
Jasco Products Company  
311 N.W. 122nd  
Oklahoma City, OK 73114  
Made in China  
RM24930-02/05  
 

Insignia Car Stereo System NS C3111 User Manual
Invacare Mobility Aid 1130213 User Manual
Jensen Cassette Player SCR 68A User Manual
Jet Tools Saw 16 Bandsaw User Manual
JVC Speaker System SP XF10S User Manual
Karcher Pressure Washer K 655 M User Manual
Kenwood Stereo Receiver KRF V6080D User Manual
Keys Fitness Home Gym KPS LP1 User Manual
Keys Fitness Treadmill PRO 400 User Manual
Kramer Electronics Network Router FC 8 User Manual