Jasco Universal Remote 20626 User Manual

20626  
Universal Remote  
Instruction Manual  
 
Introduction  
Congratulations.on.your.purchase.of.this.20626.Universal.Remote.  
Control..It.is.one.of.the.most.unique.looking,.and.easy.to.use.  
remote.controls.available.today..With.the.20626.juggling.multiple.  
remote.controls.is.a.thing.of.the.past!.Your.20626.Universal.Remote.  
controls.up.to.4.devices,.including.the.most.popular.brands.of.TV,.  
VCR,.DVD,.SAT,.CBL,.and.audio.equipment..  
Note:.Some.functions.from.your.original.remote.may.not.be.  
controlled.by.the.20626.remote..Use.the.original.remote,.if.  
available,.to.control.such.functions..Sometimes.buttons.other.than.  
described.in.these.instructions.may.actually.perform.the.function..  
For.example,.the.CHAN.and.VOL.buttons.might.be.used.to.navigate.  
through.menu.choices..We.recommend.you.experiment.with.the.  
remote.to.identify.if.such.situations.pertain.to.your.equipment..  
The.20626.Universal.Remote.is.easy.to.use,.easy.to.program,.and.it.  
gives.you.total.control—at.the.touch.of.your.fingertips!  
3
 
Button Functions  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
10.  
20.  
19.  
18.  
17.  
16.  
15.  
14.  
13.  
12.  
11.  
Note:.The.Record.button.must.be.pressed.TWICE.to.record.from.  
your.VCR..For.some.brands.of.VCRs,.you.might.need.to.press.the.  
Record.button.once,.then.press.it.again.for.three.seconds..Some.  
buttons.on.the.remote.might.have.functions.that.are.referred.to.  
by.different.names.on.the.device.you.are.controlling..E.G...LAST.  
may.be.called.RECALL,.or.ENTER may.be.called.DISPLAY..These.  
differences.depend.on.the.brand.and.model.of.your.product..Also,.  
this.remote.can.only.operate.features.that.exist.on.your.product..  
E.G.,.your.product.must.have.LAST.ability.for.the.LAST.button.to.  
operate.this.feature.  
4
 
Button Functions, cont.  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
ON-OFF: Turns.device.On.or.Off.  
Red Indicator:.Lights.when.any.button.is.pressed.  
TV, DVD, CBL/SAT, DVR/AUX:.Selects.product.to.be.operated..  
MUTE: Turns.off.the.TV.sound.while.the.picture.remains..  
VOLUME UP/DOWN: Changes.the.volume.level.of.the.product,.normally.the.TV.  
UP,.DOWN,.LEFT &.RIGHT: Navigation.buttons.  
MENU: brings.up.the.DVD.disc.Menu.screen..Use.with.the.UP,.DOWN,.LEFT &.  
RIGHT navigation.buttons.  
5.  
8.  
INPUT Selects.the.video.inputs.of.your.TV.if.equipped.with.that.feature.  
ENTER:.Used.after.direct.channel.number.entry.to.immediately.change.to.the.  
selected.channel.  
9.  
NUMBERS:.Enter.numbers.for.direct.channel.selection..Some.products.require.  
Enter.to.be.pressed.after.channel.selection.  
10.  
11.  
().Used.for.digital.channels,.e.g..2.3.  
RECORD, PLAY, STOP, REW, FF, PAUSE:...VCR.control.buttons.operate.your.VCR.even.  
when.the.remote.is.set.to.operate.the.TV..Also.operates.DVD.Scan.-/+.  
12.  
TV/VCR/INPUT: Operates.the.same.as.the.TV/VCR.or.antenna.keys.on.your.original.  
remotes.  
13.  
14.  
15.  
16.  
17.  
18.  
INFO: Displays.on-screen.channel.information,.etc.  
GUIDE: Displays.satellite.or.cable.on-screen.program.guide.  
EXIT: Exits.On-Screen.Menus.and/or.Returns.to.previous.On-Screen.selection.  
LAST: Returns.to.the.previously.selected.channel,.or.DVD.repeat.toggle..  
OK: Selects.menu.items.for.the.device.you.are.controlling.  
CHANNEL UP/DOWN:.Changes.the.channels..Also.controls.DVD/CD.CHAPTER.+/-.  
track.selection.i.e..DVD/CD.Track.Skip.Up/Down..Note.the.VCR buttons.also.control.  
DVD.when.in.DVD.Mode.  
19.  
20.  
SETUP: Used.for.setting.up.your.remote.  
BACKLIGHT: Backlighting.On/Off.  
 
Setup  
Battery Installation  
1.. On.the.back.of.the.remote,.push.down.on.the.tab.and.lift.the.  
cover.off.  
2.. Match.the.batteries.to.the.+.and.-.marks.inside.the.battery.  
case,.then.insert.2.AAA.alkaline.batteries.  
3.. Press.the.battery.cover.back.into.place.  
Battery Saver  
Your.remote.automatically.turns.off.if.the.buttons.are.depressed.  
more.than.30.seconds..This.will.save.your.batteries.should.your.  
remote.get.stuck.in.a.place.where.the.buttons.remain.depressed.  
(e.g.,.between.the.sofa.cushions).  
Code Saver  
You.will.have.up.to.10.minutes.to.change.the.batteries.in.your.  
remote.without.losing.codes.you.have.programmed..However,.do.  
not.press.any.buttons.until.batteries.are.installed.in.the.remote..If.  
buttons.are.pressed.without.batteries.in.the.remote,.all.codes.will.  
be.lost..  
Power-On Default  
The.remote.powers.on.in.TV.mode.  
Code Setup  
The.SETUP.button.is.used.to.setup.the.remote..You.can.either.setup.  
the.remote.using.the.code.for.your.brand.of.product,.from.the.code.  
tables.(on.separate.sheet),.or.you.can.search.through.the.library.of.  
codes.until.you.find.a.code.that.works.for.your.product.  
Please.refer.to.“Programming.with.Code.Search”.on.page.8.for.  
more.information.on.using.the.code.search.feature.to.learn.how.to.  
search.through.the.library.of.codes.for.your.products.  
NOTE:.You.can.store.any.kind.of.code.under.any.mode.(except.TV)..  
I.E..you.can.store.a.VCR.code.under.the.CBL button,.or.a.SAT.code.  
under.the.DVD button,.etc..However,.you.can.only.store.TV.codes.  
under.the.TV button.  
6
 
Direct Code Entry  
1.... Press.and.hold.the.SETUP.button.until.the.red.indicator.stays.  
on,.then.release.the SETUP.button.  
2.... Press.and.release.the.desired.mode.button.(TV, DVD,.etc.)..The.  
red.indicator.blinks,.then.stays.lit...  
3.. Enter.the.4.digit.code.from.the.code.tables.(on.separate.sheet)..  
Note:.after.a.valid.code.entry,.the.red.indicator.turns.off...For.  
an.invalid.code,.the.red.indicator.flashes.  
4.. With.your.device.on,.press CHANNEL UP..If.the.device.  
responds,.no.further.programming.is.required..Note:.If.some.  
buttons.do.not.operate.your.equipment,.try.one.of.the.other.  
codes.for.your.brand.  
Write.your.codes.down.here.for.easy.reference.later.  
Device.  
.................................Device.stored.........  
.........Code  
TV. ..................................................TV  
DVD. .  
CBL/SAT  
DVR/AUX  
7
 
Code Search  
If.your.product.does.not.respond.after.you.have.tried.all.the.codes.  
for.your.brand,.or.if.your.brand.is.not.listed,.try.searching.for.your.  
code.by.following.these.steps.  
1.. Manually.turn.on.the.device.(TV,.DVD,.etc.).to.be.controlled.  
2.. Press.and.hold.the.SETUP.button.until.the.red.indicator.stays.  
on,.then.release.the.SETUP button.  
3... Press.and.quickly.release.the.desired.mode.button.(TV,.DVD,.  
etc.)..The.red.indicator.blinks.off.once.  
4.. Press.the.CHANNEL UP.button.repeatedly.(up.to.300.times).  
until.the.device.to.be.controlled.changes.channel..The.red.  
indicator.blinks.off.with.each.button.press...If.you.accidentally.  
overshoot.the.code.required,.press.the.CHANNEL DOWN  
button.to.backtrack.through.the.library.until.the.device.  
changes.channel..Pressing.CHANNEL UP.changes.direction.to.  
forward.again..  
.. Press.and.release.ENTER to.install.the.code..  
Most.users.will.store.DVD.codes.under.the.DVD button,.Cable.  
codes.under.CABLE,.etc..If.(for.example).you.want.to.store.a.DVD.  
code.under.CABLE,.first.follow.the.procedure.for.Direct.Code.Entry.  
(previous.page).and.press.CABLE in.step.2.of.Direct.Code.Entry,.  
then.enter.ANY.DVD.code.in.step.3.of.Direct.Code.Entry..Then.follow.  
the.steps.for.Code.Search.on.the.previous.page..Note:..If.the.device.  
does.not.have.a CHANNEL UP.button,.use.PLAY (DVD.only).or.ON-  
OFF instead..Code.Search.starts.from.the.currently.stored.4.digit.  
number.under.that.mode.  
8
 
Code Identification Feature  
The.Code.Identification.Feature.allows.you.to.identify.the.three.digit.  
library.code.stored.under.your.device.key..For.example,.if.you.want.  
to.find.out.what.4.digit.code.is.stored.under.your.TV.device.key,.  
follow.the.six.steps.below:  
1.. Press.and.hold.the.SETUP.button.until.the.red.indicator.stays.  
on..Release.the SETUP.button.  
2.. Press.and.release.the.desired.mode.button.(TV,.DVD,.etc.)..The.  
red.indicator.blinks,.then.stays.lit...  
3.. Press.and.release.the.SETUP.button..The.red.indicator.blinks.  
off.  
4.. To.find.the.first.digit.for.the.code.stored.under.the.mode.key.  
pressed.in.step.2,.press.each.numeric.key.from.0-9.in.turn..  
When.the.red.indicator.blinks.off.the.number.you.pressed.is.  
the.first.digit.for.the.code.you.are.searching.for.  
.. To.find.the.second.digit,.repeat.step.4,.this.time.when.the.red.  
indicator.blinks.off.this.is.the.second.digit.  
6.. Repeat.step.4.to.find.the.third.and.fourth.digits.  
9
 
Setup, cont.  
Programming Combo Device Codes  
Some.Combo.devices.(e.g..TV/VCR,.TV/DVD,.DVD/VCR,.etc.).will.  
require.you.to.set.up.two.different.Mode.buttons.to.control.both.  
parts.of.the.Combo.device..For.example,.if.you.have.a.TV/DVD.  
Combo,.you.might.need.to.set.up.one.code.under.the.TV button.to.  
control.the.TV.part.AND.a.separate.code.(under.any.other.Mode.  
button).to.control.the.DVD.part.  
Controlling Combo Devices  
Some.Combo.devices.(e.g..TV/VCR,.TV/DVD,.DVD/VCR,.etc.).have.  
separate.buttons.on.the.original.remote.to.select.the.part.of.the.  
Combo.device.to.be.controlled..For.example,.if.your.Combo.device.  
is.a.DVD/VCR.then.its.original.remote.might.have.separate.DVD.  
and.VCR.buttons.for.selection.of.the.Combo.part.you.would.control..  
The.equivalent.button.functions.can.be.found.on.your.new.remote.  
by.using.the.device.Mode.and.SETUP buttons...  
Referring.to.“Programming.with.Code.Search”.on.page.8,.setup.  
a.device.Mode.(e.g..DVD).with.the.correct.code.for.your.Combo.  
device..Assuming.the.DVD/VCR.Combo.device.is.the.example.and.  
its.code.is.programmed.under.DVD Mode,.press.and.hold.the.DVD.  
Mode.button.for.more.than.one.second.to.send.the.DVD.button.  
command..To.send.the.VCR.button.command,.quickly.press.and.  
release.the.SETUP button.followed.by.pressing.and.releasing.  
the.DVD.Mode.button..This.method.can.be.applied.similarly.to.  
all.Combo.devices.(e.g..TV/VCR,.TV/DVD,.DVD/VCR,.etc.).and.is.  
available.for.all.Modes..Note.this.feature.is.not.supported.by.all.  
codes..  
Controlling Devices Requiring Separate Power On and Off  
Buttons  
Some.devices.(e.g..certain.RCA.TVs).require.separate.Power.On.and.  
Power.Off.buttons.to.turn.the.device.on.and.off..The.equivalent.  
button.functions.can.be.found.on.your.new.remote.by.using.the.  
device.Mode.and.ON-OFF buttons..Referring.to.“Programming.with.  
Code.Search”.on.page.8,.setup.a.device.Mode.(e.g..TV).with.the.  
correct.code.for.your.device..  
Assuming.a.TV.device.is.the.example.and.its.code.is.programmed.  
under.TV.Mode,.to.turn.your.TV.on,.press.and.hold.the.TV.Mode.  
button.for.more.than.one.second.to.transmit.the.Power.On.button.  
command..  
10  
 
Setup, cont.  
Controlling Devices Requiring Separate Power On and Off  
Buttons, cont.  
To.turn.the.TV.off,.press.and.release.the.ON-OFF.button.to.transmit.  
the.Power.Off.button.command..This.method.can.be.applied.  
similarly.to.any.device.and.is.available.for.all.Modes..Note.this.  
feature.is.not.supported.by.all.codes..  
VCR/DVD/DVR Punch-Through Feature  
This.remote.allows.the.6.VCR.transport.buttons.(i.e..PLAY,.PAUSE,.  
STOP,.FF,.REWIND,.and.REC).to.Punch-Through.control.from.any.  
Mode.programmed.with.TV,.SAT.or.Cable.codes.to.the.last.VCR,.  
DVD.or.DVR.programmed.Mode.you.used...Normally.other.types.  
of.remotes.only.punch-through.(from.another.Mode).on.the.6.VCR.  
buttons.to.the.device.programmed.under.the.VCR Mode.button..  
This.is.not.much.use.if.you.are.using.a.DVD.programmed.under.a.  
Mode.other.than.VCR..For.example,.if.you.have.3.DVD,.VCR.or.DVR.  
devices.programmed.into.this.remote,.the.last.one.you.accessed.  
on.the.remote.will.be.the.one.that.has.control.of.the.6.VCR.  
transport.buttons.when.in.any.other.Mode...This.feature.will.not.  
operate.if.the.programmed.TV,.SAT.or.Cable.code.has.its.own.VCR.  
transport.button.control.e.g..a.TV.Combo,.SAT/PVR,.etc.  
Volume/Mute Control and Punch-Through Feature  
This.remote.lets.you.select.which.device.Mode.controls.your.  
Volume/Mute.buttons..The.remote.is.initially.set.(factory.default).  
for.all.device.Modes.programmed.with.“Visual”.codes.(e.g..TV,.VCR,.  
DVD,.DVR,.SAT.&.CABLE).and.“Audio”.codes.(e.g..CD.&.AUDIO).to.  
use.their.own.Volume/Mute.control.if.present..If.the.programmed.  
Visual”.code.has.no.Volume/Mute.operation.of.its.own.then.those.  
buttons.will.punch-through.control.to.the.TV.Mode.device.without.  
needing.to.change.to TV.Mode..Please.refer.to.the.next.page.for.  
more.information.  
.
11  
 
Setup, cont.  
Any Mode chosen for Volume/Mute control MUST have its own  
Volume/Mute function or the Volume/Mute buttons will do  
nothing.  
Setting ALL Volume/Mute Control to any one Mode  
This.routine.can.set.all.Modes.to.“punch-through”.to.any.one.  
chosen.Mode.for.Volume/Mute.button.control.without.the.needing.  
to.change.to.that.Mode.  
1... Press.and.hold.the.SETUP button.until.the.red.indicator.turns.  
on,.then.release.the.button.  
2... Press.and.hold.the.MUTE.button.until.the.red.indicator.blinks.  
off,.then.release.the.button.  
3... Press.and.release.the.desired.Mode.button.(TV,.DVD,.etc.).for.  
Volume/Mute.control,.the.red.indicator.blinks.then.stays.on.  
4... Press.and.release.the.MUTE button.and.the.red.indicator.turns.  
off..The.red.indicator.will.blink.rapidly.for.three.seconds.if.the.  
Mode.you.have.selected.has.no.Volume/Mute.control..  
... All.other.Modes.will.now.punch-through.to.your.chosen.Mode.  
for.Volume/Mute.control.  
6... All.“Visual”.and.“Audio”.programmed.Modes.will.now.punch-  
through.to.the.respective.Modes.you.have.chosen.for.Volume/  
Mute.control.  
Setting any Mode to use its own Volume/Mute Control  
This.routine.can.set.any.Mode.to.use.only.its.own.Volume/Mute.  
control..Note.-.If.your.chosen.Mode.has.no.Volume/Mute.functions.  
of.its.own.then.the.Volume/Mute.buttons.will.do.nothing.  
1... Press.and.hold.the.SETUP button.until.the.red.indicator.turns.  
on,.then.release.the.button.  
2... Press.and.hold.the.MUTE.button.until.the.red.indicator.blinks.  
off,.then.release.the.button.  
3... Press.and.release.the.desired.Mode.button.(TV,.DVD,.etc.),.the.  
red.indicator.blinks.then.stays.on.  
4... Press.and.release.the.VOLUME-.(Down).button,.the.red.  
indicator.blinks.then.stays.on.  
... Press.and.release.the.MUTE button.and.the.red.indicator.turns.  
off..  
6... All.“Visual”.and.“Audio”.programmed.Modes.will.now.punch-  
through.to.the.respective.Modes.you.have.chosen.for.Volume/  
Mute.control.  
 
Troubleshooting  
Remote does not operate your product.  
•.. Press.the.mode.button.of.the.product.you.want.to.control.  
•.. Program.the.remote.with.a.new.code.  
•.. Install.new.batteries..(You.might.have.to.reprogram.your.remote.  
after.installing.new.batteries.)  
•.. Remote.may.not.be.compatible.with.your.product.  
Remote does not operate some features of your product.  
•.. Program.remote.with.a.new.code.  
•.. Remote.may.not.be.able.to.operate.all.features.of.your.product.  
or.button.names.might.be.different.than.your.product.  
Red Indicator blinks after you program a product code.  
•.. Remote.did.not.accept.the.code.  
•.. Try.to.program.the.code.again.or.try.a.different.code.  
If.you.lose.your.codes.or.programming.instructions,.you.can.find.  
them.available.on.our.website:.www.jascoproducts.com  
 
90 Day Limited Warranty  
Jasco.Products.Company.warrants.this.product.to.be.free.from.  
manufacturing.defects.for.a.period.of.ninety.days.from.the.original.  
date.of.consumer.purchase...This.warranty.is.limited.to.the.repair.  
or.replacement.of.this.product.only.and.does.not.extend.to.  
consequential.or.incidental.damage.to.other.products.that.may.be.  
used.with.this.unit...This.warranty.is.in.lieu.of.all.other.warranties.  
express.or.implied...Some.states.do.not.allow.limitations.on.how.  
long.an.implied.warranty.lasts.or.permit.the.exclusion.or.limitation.  
of.incidental.or.consequential.damages,.so.the.above.limitations.  
may.not.apply.to.you...This.warranty.gives.you.specific.rights,.and.  
you.may.also.have.other.rights.which.vary.from.state.to.state....If.  
unit.should.prove.defective.within.the.warranty.period,.return.  
prepaid.with.dated.proof.of.purchase.to:  
Jasco.Products.Company  
10.E..Memorial.Road  
Oklahoma.City,.OK..73114  
14  
 
20626  
Universal Remote  
Instruction Manual  
Jasco.Products.Company  
10.E..Memorial.Road  
Oklahoma.City,.OK..73114  
Made.in.China. ..............................  
1ꢀ  
20626-04/09  
 

Indesit Dishwasher IDF125 User Manual
Indesit Washer IWC 61651 User Manual
Insignia Car Satellite TV System NS 22E400NA14 User Manual
Jotul Stove F 500 User Manual
Jura Capresso Coffeemaker 68191 User Manual
JVC Speaker RV B99 User Manual
Kawasaki Motorized Toy Car R8126 User Manual
Kenwood Kitchen Grill Snack Maker User Manual
Kodak Digital Photo Frame P76 User Manual
Kompernass Indoor Furnishings KH 4102 User Manual