Jasco Home Security System 51147 User Manual

F
REC  
to download application notes, manuals and to find out more about the GE SmartHome product line!  
Enclosed you will find  
Operating Instructions  
(1) Wall Mount Control  
Double-Sided Tape / Screws  
(for mounting)  
1. Find the slot labeled HOUSE CODE on the back of the unit.  
2. Set the HOUSE CODE to any one of the following settings:  
Specifications  
GE Smart Remote Plus  
Transmitter  
ON  
1
2
12V A23 Battery (installed)  
Battery Type ............................................................................................................. Use ONLY A23 (12V) Alkaline  
Wireless Remote Transmitter  
GE SmartSecuritySystem  
The GE Smart Remote Plusadvantage  
Any transmitter in the GE Smart Remote Plus  
product line is capable of controlling every  
receiver—the ultimate in home convenience.  
Control any number of light fixtures or  
NOTE: The functional range will decrease as the battery wears out so make sure to replace the  
battery every 6 months for best results.  
NOTE: Make sure ALL your GE Smart Remote Plus devices have the same HOUSE CODE setting.  
*Functional range may be adversely affected by one or more of the following factors: weather, radio  
User’s Manual  
The transmitters WILL NOT control the receivers if they have different HOUSE CODE settings.  
frequency interference, low transmitter battery and obstructions between the transmitter and receiver.  
Expanding your system  
appliances from up to 150ft away by  
*
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:  
1. This device may not cause harmful interference, and;  
2. This device must accept any interference received, including interference that may cause undesired  
operation.  
The GE Smart Remote Plus devices operate on any of 8 user-settable channels. The channels  
are easy to set / adjust – with the simple turn of a knob. Set up your GE SmartHomeby  
purchasing as many transmitters and receivers as you need. The following table is just one  
example of how you can configure your Smart Remote Plus system:  
IMPORTANT! HOUSE CODES help eliminate interference (devices randomly turn on / off).  
If you experience interference, change the HOUSE CODE on all your GE Smart Remote Plus  
transmitters and receivers to a different setting.  
choosing the transmitter and receiver  
combination that best suits your needs.  
3. Set the CHANNEL by using the knob on front as shown.  
4
5
3
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance  
6
2
7
Area  
CH Transmitters  
Receivers  
could void the user's authority to operate the equipment.  
NOTE: If you set your Wall Mount Control to CHANNEL 1, the unit can control  
any receiver set to CHANNEL 1. If you set your Wall Mount Control to  
CHANNEL 2, the unit can control any receiver set to CHANNEL 2 ... and so on.  
1
8
Bedroom  
1
Bedside - Wall Mount Control  
(2) Bedside Lamps - (2) Socket Adapters  
Entrance - Wall Mount Control Corner Torchiere - Indoor Outlet Adapter  
Overhead Light Fixture - Wall Switch  
GE is a trademark of the General Electric Company  
and is used under license to  
Jasco Products Company LLC,  
311 N.W. 122nd Street,  
IMPORTANT! A transmitter will control a receiver ONLY if they have the same  
HOUSE CODE and CHANNEL settings.  
Entertainment System - Indoor Outlet Adapter  
Oklahoma City, OK 73114.  
Living Room  
2
Coffee Table - Timer/Controller (2) End Table Lamps - (2) Socket Adapters  
Entrance - Wall Mount Control Overhead Light Fixture - Wall Switch  
Entertainment System - Indoor Outlet Adapter  
The following GE Smart Remote Plus receivers (sold separately) can be controlled by THIS transmitter:  
4. Mounting  
NOTE: Mounting the Wall Mount Control on masonry or metal walls may degrade the functional  
90 DAY LIMITED WARRANTY: Jasco Products Company warrants this product to be  
free from manufacturing defects for a period of ninety days from the original date of  
consumer purchase. This warranty is limited to the repair or replacement of this  
product only and does not extend to consequential or incidental damage to other  
products that may be used with this unit. This warranty is in lieu of all other  
warranties express or implied. Some states do not allow limitations on how long an  
implied warranty lasts or permit the exclusion or limitation of incidental or  
consequential damages, so the above limitations may not apply to you. This  
warranty gives you specific rights, and you may also have other rights which vary  
from state to state. If unit should prove defective within the warranty period, return  
prepaid with dated proof of purchase to:  
Christmas Tree - Indoor Outlet Adapter  
range.  
Tape Mounting  
3
4
5
6
7
8
Window Santa - Indoor Outlet Adapter  
Lighted Poinsettia - Indoor Outlet Adapter  
A. Make sure surfaces are free of dust, oil and other substances that could affect adhesion.  
B. Attach the double-sided tape to back of the Wall Mount Control housing.  
C. Press the tape firmly to the mounting surface.  
Indoor Outlet  
RF100RXPS  
Outdoor Outlet  
RF106RXPS  
Socket Adapter  
RF104RXPS  
Wall Switch  
RF102RXPS  
Basement  
Garage  
Entrance - Wall Mount Control  
Entrance - Wall Mount Control  
(4) Overhead Can Fixtures - (4) Socket Adapters  
(2) Fluorescent Fixtures - (2) Indoor Outlet Adapters  
Screw Mounting  
The receivers above can also be controlled by the following GE Smart Remote Plus transmitters (sold separately):  
A. Using a slotted screwdriver, remove the faceplate of the Wall Mount Control.  
B. Place the detached back plate where desired and mark screw locations.  
C. Insert the mounting screws into the back plate holes and screw into place.  
D. Replace the Wall Mount Control faceplate.  
(2)FluorescentFixtures-(2)OutdoorOutletAdapters  
OverheadLightFixture-WallSwitch  
Outdoor  
Foyer-WallMountControl  
CarKeys-KeyChainRemote  
EntryLight-WallSwitch  
CoachLantern-WallSwitch  
5. Use the toggle button to activate the Wall Mount Control (ON/OFF operation). Make sure  
to press firmly and for a minimum of 1 second for best results. An indicator lights RED when  
a signal is sent.  
UDED!  
INCL  
Jasco Products Company  
311 N.W. 122nd  
Oklahoma City, OK. 73114  
ChristmasLights-OutdoorOutletAdapter  
YardSanta-OutdoorOutletAdapter  
Key Chain Remote  
RF100TXPS  
Wall Mount Control  
RF102TXPS  
Whole-Home Control  
RF2000KINPS  
Motion-Sensing Control  
RF613TX  
6. Using any of the receivers set to the same CHANNEL and HOUSE CODE, test the installation by using  
the ON and OFF buttons.  
IMPORTANT! These devices are NOT compatible with devices from other systems.  
You must purchase Smart Remote Plus transmitters and receivers to ensure compatibility.  
Kitchen  
Entrance-WallMountControl  
CoffeeMaker-IndoorOutletAdapter  
If your unit does not work properly or if you want additional assistance, please call 1-800-443-4924.  
 

Innotek Switch ADV 1000E User Manual
Invacare Respiratory Product IRC5LXO2 IRC5LX User Manual
JVC Digital Camera GR D350U User Manual
JVC Digital Camera GR D850UC User Manual
JVC DVD Player XV M512SL User Manual
JVC Projector DLA HD100 User Manual
Kenwood Car Satellite TV System KMD 870R User Manual
Kenwood CD Player DP M5550 User Manual
KitchenAid Mixer KM25G0XWH5 User Manual
KitchenAid Ventilation Hood 30 762 cm 36 914 cm 48 1219 cm Wall Mount Canopy Range Hood User Manual