Jasco Digital Camera HO98066 User Manual

HO98066  
EasyCamPlus  
Instruction Manual  
HO98066  
 
1. System Requirements  
• Personal computer, laptop, desktop, or IBM compatible with Pentium 166  
MHz minimum, and with an active USB (Universal Serial Bus) port.  
• Windows 98 SE / ME / 2000 / XP, CD ROM drive, color monitor, mouse and  
keyboard.  
• For video conference, your computer must have modem and  
communication software for Internet connection.  
2. Package Includes  
• PC Camera  
• Camera Mount  
• Camera Stand  
(with USB cable)  
• CD Installation Disc  
• User’s Guide  
1
 
3. Names of Parts  
4. Specifications  
Image Sensor  
1/3" color progressive CMOS, 640 x 480 pixels  
Lens Specification  
Focus Range  
F2.0, f=7.3mm , View Angle 46°  
Manual focus, 1cm to infinity  
Operating System  
Microsoft Windows 98 SE / ME / 2000 / XP  
Video Capture Res. 640x480, 352x288, 320x240, 176x144, 160x120  
Frame Rate  
Snap Shot Button  
PC Interface  
Power  
Up to 30 Frames per Second  
Hardware  
USB  
Powered from USB port  
2
 
5. Installing USB Driver and Software  
For Windows 98 & ME only:  
Install driver and software before  
connecting camera to PC.  
1.Turn on the computer.  
2.Insert installation CD into the CD-ROM  
drive, the installation CD menu should  
appear.  
3.Select "PC Camera Driver", follow  
on-screen instructions for “complete”  
installation, and the driver will  
automatically install. Next, select ArcSoft Video Impressions 1.6, and  
follow the instructions as they appear. Then, select ArcSoft Photo  
Impressions 4.0, and follow the instructions as they appear.  
4.Restart the computer.  
5. Connect camera to USB port.  
For Windows 2000 & XP only:  
Install driver and software before connecting camera to PC.  
1.Turn on the computer.  
2.Insert installation CD into the CD-ROM drive, the installation CD menu  
should appear.  
3.Select "PC Camera Driver nd follow on-screen instructions for “complete”  
installation. Next, select ArcSoft Video Impressions 1.6, and follow the  
instructions as they appear. Then, select ArcSoft Photo Impressions 4.0,  
and follow the instructions as they appear.  
4. Connect camera to USB port.  
3
 
6. ArcSoft VideoImpression  
ArcSoft VideoImpression is  
your ticket to cool home movies  
and slide shows. If you know how  
to drag-and-drop with your  
mouse, you're all set! In no time  
you can combine still images,  
video clips, audio tracks, text,  
and special effects into you very  
own movie. Make a VCD and  
play your movie on your player!  
Working with VideoImpression  
• Getting Started  
• Working with Albums  
• Working with the Storyboard  
• Editing Images  
• Editing Video  
• Editing Audio  
Note: For detailed operation  
procedures on ArcSoft, open either  
PhotoImpression or VideoImpression  
and click on the “?” in the upper right  
hand corner of the window.  
• Printing a Still Image from a Video  
• Saving a Movie  
Using the VideoImpression Software  
Open VideoImpression by either double clicking the icon on your desktop or  
selecting from the “Programs” section of the “Start” menu.  
1. Click on “NEW”.  
2. Select “Capture” by clicking on the Camera icon. (You should see an image  
on the monitor)  
4
 
7. ArcSoft PhotoImpression  
ArcSoft PhotoImpression is an all-inclusive application designed  
specifically for novice users. It combines photo editing with  
additional creative and printing tools that maximize your digital  
imaging experience.  
Features Include  
• Create dynamic  
images  
• Editable text  
• Instantly remove  
red-eye  
• Special Effects and  
enhancements  
• Intuitive resizing  
options  
• Wide variety of frames,  
shapes, and brush  
stroke edges  
• Photo editing that is  
easy and fun  
• Multiple advanced  
printing options  
Note: For detailed operation  
• Desktop interaction  
procedures on ArcSoft, open either  
• Works great with digital  
PhotoImpression or VideoImpression  
cameras  
and click on the “?” in the upper right  
• Works great with most  
hand corner of the window.  
scanners  
5
 
Using the ArcSoft PhotoImpressions Software  
To open PhotoImpression  
1. Double click on PhotoImpression icon on the desktop, or select from  
“Programs” section of your “Start” menu.  
2. Click on camera/scanner lower left, under Album.  
3. Select “Acquire” by clicking on the box containing the camera and the  
scanner (not the video camera) that appears to the left of the sample  
photos.  
4. The image will appear.  
5. Click on capture to capture the image.  
6. Double left click on the thumbnail you want to edit.  
Using the VideoImpression Software  
Open VideoImpression by either double clicking the icon on your desktop or  
selecting from the “Programs” section of the “Start” menu.  
1. Click on “NEW”.  
2. Select “Capture” by clicking on the Camera icon. (You should see an image on  
the monitor)  
6
 
8. Uninstalling USB Driver and Software  
For Windows 2000 / 98 SE / Me:  
Uninstalling Software  
1. Click "Start" from the task bar and choose ”Setting”.  
2. Choose "Control Panels" and Double click "Add/Remove Programs".  
3. Select the program to be uninstalled "Arcsoft Video Impression 1.6" or  
“Arcsoft Photo Impression”.  
4. Click on "Remove Program" and follow the instructions on screen.  
• Uninstall Camera's Driver  
1. Click "Start" from the task bar and choose ”Setting”.  
2. Choose "Control Panels" and Double click "Add/Remove Programs".  
3. Select the program to be uninstalled "PC Camera (602a VGA)".  
4. Click on "Remove Program" and follow the instructions on screen.  
For Windows XP:  
• Uninstalling Software  
1. Click "Start" from the task bar and choose ”Control Panels”.  
2. Double click "Add or Remove Programs".  
3. Select the program to be uninstalled "Arcsoft Video Impression 1.6" or  
“Arcsoft Photo Impression”.  
4. Click on "Remove Program" and follow the instructions on screen.  
• Uninstall Camera's Driver  
1. Click "Start" from the task bar and choose "Control Panels".  
2. Double click "Add or Remove Programs".  
3. Select the program to be uninstalled "PC Camera (602a VGA)".  
4. Click on "Remove Program" and follow the instructions on screen.  
7
 
9. Internet Video Conference  
To run video conference with another person, you and the person must have  
the computer station configured with web camera, microphone, speakers,  
and have access to the Internet.  
You have to install video conference software. This CD includes NetMeeting  
software for use with Microsoft 98 and ME. There are other free options  
available for Windows 2000 and XP users (See section 10 for details.).  
Starting NetMeeting, you have to follow the simple set up procedure  
on the computer screen, enter your personal information and adjust the  
microphone volume. Here's how video conference works:  
To receive video:  
1.Call someone you want to see/hear.  
2.On the Tools menu, point to Video, and then click Receive.  
If you have a video camera, you can send video to the person you're calling.  
To send video  
1.Call someone you want to see/hear.  
2.Click the Start Video button.  
Note:  
You can also send video by clicking the Tools menu, pointing to Video, and  
then clicking Send. After starting the video, the button changes to Stop  
Video. To stop the video, click the Stop Video button again.  
8
 
10. Installation for NetMeeting/Windows Messenger  
For XP Only  
Windows XP comes standard with Windows Messenger. If  
Windows Messenger is not a part of your XP Operating System,  
you will need to down load Windows Messenger, using the  
following instructions:  
2. Click on “Download Now”.  
3. Click on “Open”. Downloads begin. Follow the instructions as  
each window pops up.  
For Windows 2000  
To use NetMeeting on Windows 2000, click Start, point to Programs,  
point to Accessories, point to Communications, and click Net Meeting.  
Follow the download instructions. If you do not have NetMeeting  
installed, you can download from:  
9
 
For Windows 98/ME  
Reinsert the installation CD. Click on Microsoft NetMeeting 3.01 and  
follow the on-screen instructions. Or, use the instructions below.  
1. Click Next, type the appropriate information in the First Name, Last  
Name, E-Mail Address, Location, and Comments dialog boxes,  
and then click Next. NOTE: The Location and Comments  
information is optional.  
2. Click Next, click to select the Log into a directory server when  
NetMeeting starts check box (this is optional), and then type the  
name of the directory server in the Server Name dialog box. If you  
do not want your name to be visible in the directory, click to select the  
Do not list my name in this directory check box.  
3. Click Next, and then select the appropriate location for the shortcuts.  
4. Click Next, follow the instructions in the Audio Tuning Wizard, and  
then click Finish. After you run NetMeeting for the first time, you can  
modify the information you entered about yourself or the directory  
server name that you want to connect to. To do so, click Options on  
the Tools menu, click the General tab, and then enter the  
appropriate information. Also, you can run the Audio Tuning Wizard  
again, and to do so, click AudioTuning Wizard on the Tools menu.  
If you can't install the NetMeeting from your PC directly, please log  
Download from Www.Somanuals.co1m0. All Manuals Search And Download.  
How To Start With The Camera  
1. Plug the camera into your PC first.  
2. Click the "NetMeeting" to go to the main screen, and then click "Start Video"  
button, then you can start working with NetMeeting.  
3. If you need more information or instruction on how to use a specific feature or  
tool, click the “HELP” button in the upper right-hand corner of the screen.  
Download from Www.Somanuals.co1m1. All Manuals Search And Download.  
11. How to Install MSN Messenger  
1
How To Install MSN Messenger  
1.1 For Windows 98/Me/2000 Users  
1.1.1 Please log on to http://messenger.msn.com to download.  
After the installation package is downloaded to your computer, it  
will start installing MSN Messenger. All you have to do is follow  
the instructions.  
1.1.2 After the installation is completed, click Start, point to Programs,  
and click Windows Messenger.  
1.2 For Windows XP Users  
1.2.1 Click Start, point to Programs, and click Windows Messenger.  
1.2.2 After you run Messenger for the first time, you can add friends to  
your list and send instant messages.  
2
How To Start With The Camera  
2.1 Plug the camera into your PC first.  
2.1.1 For Windows 98/Me/2000 Users  
Click the “Messenger” to go to the main screen, click  
NetMeeting, then you can have a Video Conversation with  
NetMeeting. For more details about NetMeeting, please refer to  
“How to Install NetMeeting”.  
2.1.2 For Windows XP Users  
Click the “Messenger” to go to the main screen, click Actions,  
click Start a Video Conversation, then you can have a Video  
Conversation with Messenger.  
If you need more information or instruction on how to use a specific feature  
or tool, click the “Help” button in the upper right-hand comer of the screen.  
Download from Www.Somanuals.co1m2. All Manuals Search And Download.  
12. Warranty/FCC Regulations  
2 Year Limited Warranty  
Jasco Products Company warrants this product to be free from manufacturing defects for a  
period of two years from the original date of consumer purchase. This warranty is limited to  
the repair or replacement of this product only and does not extend to consequential or  
incidental damage to other products that may be used with this unit. This warranty is in lieu of  
all other warranties express or implied. Some states do not allow limitations on how long an  
implied warranty lasts or permit the exclusion or limitation of incidental or consequential  
damages, so the above limitations may not apply to you. This warranty gives you specific  
rights, and you may also have other rights which vary from state to state. If unit should prove  
defective within the warranty period, return prepaid with dated proof of purchase to:  
Jasco Products Company., 311 N.W. 122nd , Oklahoma City, OK. 73114  
FCC Compliance Statement  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not installed or used in  
accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in television reception, which  
can be determined by turning the equipment off and on, the user is encouraged to try and  
correct the interference by one or more of the following measures:  
(1) Reorient or relocate the receiving antenna.  
(2) Increase the separation between the equipment and the receiver.  
(3) Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
(4) Consult the dealer or an experienced radio/TV technician for help.  
FCC WARNING:  
Changes or modifications not expressly approved by the party responsible for compliance could  
void the user’s authority to operate the equipment.  
Distributed for THOMSON INC. by Jasco Products Company, 311 N.W. 122nd Street, Oklahoma City, Oklahoma  
Download from Www.Somanuals.co1m3. All Manuals Search And Download.  

Indesit Freezer UFAN 300 User Manual
Ingersoll Rand Grinder 16574063 User Manual
InSinkErator Garbage Disposal Evolution Essential User Manual
Invacare Mobility Aid LC11 User Manual
Jacuzzi Hot Tub BR05 User Manual
JBL Speaker SR4715X User Manual
Jenn Air Range GAS DOWNDRAFT SLIDE IN RANGE User Manual
JVC Camcorder LYT2077 001B M User Manual
JVC Personal Computer KW ADV790 User Manual
Kawai Musical Instrument Amplifier KM 15 User Manual