Jasco Computer Hardware HO97929 User Manual

USB 2.0 Individual Card Reader/Writer  
User’s Manual  
HO97929  
HO97930  
HO97931  
HO97948  
 
5. Installation  
Windows® 98 SE  
1. DO NOT connect the card reader to your computer until the driver is  
installed.  
2. Make sure all Microsoft® updates and patches for your operating  
system are installed. These can be found at www.microsoft.com.  
3. Close all open applications before beginning.  
4. Insert the “GE USB 2.0 Individual Card Reader Drivers” CD into  
your CD drive.  
5. Follow the onscreen instructions to complete the driver installation.  
6. You will need to restart your computer after installation is complete.  
7. After your computer has rebooted, plug the card reader into a USB  
port on your computer or hub directly or via the extension cable.  
8. Your computer will detect your card reader, and may load additional  
drivers for it.  
9. Insert your card into the card slot on your card reader. The card is  
correctly inserted when the blue LED light remains on.  
10. When you insert a card into the card reader it will show up as a new  
removable storage drive on your computer. (This can be found with  
“My Computer”.)  
Note 1:  
If the card is not able to be read or you incur an error, you may not have  
allowed enough time for all of the additional drivers to load. Remove and  
re-insert the card.  
Note 2:  
Do not force the card into any slot. The card must be inserted with the  
correct orientation to avoid damage to your card and the card reader.  
 
Windows® 2000, ME or XP & Mac® OS 9.X or 10.X  
NO DRIVER IS REQUIRED.  
1. Plug the card reader into a USB port on your computer or hub.  
(Optionally you may choose to use the included USB extension  
cable.)  
2. Your computer will detect your card reader, and may load additional  
drivers for it.  
3. Insert your card into the card slot on your card reader. The card is  
correctly inserted when the blue LED light remains on.  
4. When you insert a card into the card reader it will show up as a new  
removable storage drive on your computer. (This can be found with  
“My Computer”.)  
Note 1:  
If the card is not able to be read or you incur an error, you may not have  
allowed enough time for all of the additional drivers to load. Remove and  
re-insert the card.  
Note 2:  
Do not force the card into any slot. The card must be inserted with the  
correct orientation to avoid damage to your card and the card reader.  
 
90 DAY LIMITED WARRANTY  
Jasco Products Company warrants this product to be free from  
manufacturing defects for a period of ninety days from the original date  
of consumer purchase. This warranty is limited to the repair or  
replacement of this product only and does not extend to consequential or  
incidental damage to other products that may be used with this unit. This  
warranty is in lieu of all other warranties express or implied. Some states  
do not allow limitations on how long an implied warranty lasts or permit  
the exclusion or limitation of incidental or consequential damages, so the  
above limitations may not apply to you. This warranty gives you  
specific rights, and you may also have other rights which vary from state  
to state. If unit should prove defective within the warranty period,  
return prepaid with dated proof of purchase to:  
Jasco Products Company  
10 East Memorial  
Oklahoma City, OK 73114  
 

Insignia Car Satellite TV System NS 55DR420NA16 User Manual
Insignia Car Video System NS 55E790A12 User Manual
Intel Telephone D945PVS User Manual
JVC Battery Charger AA V100U User Manual
JVC Flat Panel Television CA R456 User Manual
JVC Projection Television 0407TNH II IM User Manual
KitchenAid Appliance Trim Kit KERC607HBLO User Manual
KitchenAid Trimmer KEBI100B User Manual
Klipsch Speaker R 2502 W User Manual
Korg Network Card KTV1 User Manual